Fully automatic Steel coil packaging system

Steel Coil Packaging line

Steel coil packing line Packing capacity and flexibility

contact with: https://www.fhopepack.com/Automatic_Coil_packing_machinery.html Email: info@fhopepack.com
  • CAPACITY – Horizontal steel coil packaging line 15 coils/h vertical line 31 slitted coils / h
  • FLEXIBILITY – Maximum coil size on the horizontal line 26 t -> 30 t and on the vertical line 5 t -> +6 t
  • FLEXIBILITY – Maximum outside diameter 1800 mm -> 2000 mm.
  • FLEXIBILITY – The modernized line must have “manual finishing stations” for possible “online” customization of the package if customer has special requirements.

Whatever will be the nature of the packing resource, the location must be close to the finishing lines. So, the existing location of the ARP-line is quite close to ideal cause:

  1. the distance to the slitting lines and coil buffers are short (minimum delays for the slitting lines and packing line),
  2. the access to the automated high bay storage is close
aluminum coil packing line with edge protection
the steel coil packign line equipment included in the Supply can be taken into normal operation as defined in the Contract. – the operation personnel have been trained according to the Contract. – the operation and maintenance instructions of the plant have been delivered. – special tools for maintenance and repairs have been delivered. – final drawings and technical documents of the equipment have been delivered according to the Contract. – all possible oil fillings have been carried out along with steel coil packing line.
– pressure vessels included in the Supply have been accepted according to the regulations. – wear- and spare parts included in the supply have been delivered. – the meters and limit values of them, remote controls, alarms and electrical interlocking have been checked. – the site has been cleaned up and waste materials have been transported away. – Seller has designated according to the Contract an experienced person to supervise or perform the start-up and test run and the person in question has arrived at the Site.

Automatic steel wire winding and strapping machine

Requirement for steel wire winding and strapping machine
Would be possible to feed the machine with the vertical coil like I show you in this photo? Obviously we should reduce the velocity production.

image011(06-19-16-05-01).png

This is the most popular format in our company for steel wire, it weighs 1 Tone and the diameters we use to recoil are from D1,5 to D5. The weighs we use to make packs are: 5 kg, 15 Kg, 25 Kg, and 50 Kg. Galvanized heavy steel wire.

—–Do you mean re-coiling the steel wire from basket as above picture? And re-winding into 5,15,25,50Kg…?

——- exactly, it’s what you show in the next link.

Yes, rewinding into this weights.

The un-widing is like follow video.

Coiling per weight is not problem

However we also can do the compact coil used in the video if it will be a problem.

——Sorry i don’t understand

———- don’t worry, it is solved if we can do recoiling steel wire from basket.

More questions: it’s possible to make 50 KG packs?

——What is the size of the 50Kg PACKS?

‐——- I mean if can we make a rewind into a 50kg pack.

How the automatic palletizer put the coils vertically? Or simply keep horizontal and I have to make an adaptation?

Coil palletizing is ok.

image012(06-19-16-05-01).jpg
image013(06-19-16-05-01).jpg

—–

What is the velocity production with the full installation in Kg/h?

Sorry about many questions.

 ——Depends on the coil size

Would be possible to receive a quotation about two supposes?

A: The machine without palletizing. Only coiling part. It’s possible we can make adaptation at our robot, it depends some factors.

—-It is possible, by we need to have the robot’s information and video.

B: Complete installation with palletizing, the coiler and the palletizer.