The Speed-Solar panel Machine is a fully automatic cutting system for processing all solar panel components that are used in the property business.
Automatic board digesting machine SPM
Automatic panel finalizing machine SPM
The aircraft parts are drilled, labelled, sawed and milled with laptop or computer control.
Aspects of application are, by way of example, decreasing and handling of panelling in timber frame construction, OSB sections in wood design or linings in the internal accessories and so forth.
The finalizing is done precisely through a spherical found, end mills, drilling units as well as a labelling model.
Chip removal is always conducted specifically in the handling place. The board reloading could be effected personally or together with the existing vacuum lifter or by means of our completely automated reloading system.
The owner can key in cuts and processings entirely on the machine pc or even the total details could be transmitted from all of commercial readily available attracting applications.
The machine program incorporates a “Nesting” software for waste materials optimisation.
The SPM2 is actually a fully automated machine for mass creation of all solar panel components, which can be utilized in development, e.g.:
Wood panels
fibreboard, Chipboard and OSB panels
Wallboard individual panels
Fermacell-Hi-def panels
Dietary fibre-concrete board individual panels
Eternit individual panels
HPL sections
Firm foam insulation wall surface solar panels
Hardwood soft board insulating walls individual panels and many others.
The laminar pieces from 600 by 600 mm to 3200 x 1300 millimeters or 6000 x 2600 mm along with a fullness of 5 to 120 millimeters are milled, labelled, drilled and sawed with pc control.
Regions of program are processing of panelling in wood body construction, OSB solar panels in hardwood design, linings from the internal accessories or bulk creation of individual panels for special formwork building, fa? ade production and construction of wood packing just among others.
Handling options
Saw reductions by any means aspects
Milling of all forms, letterings and contours
Milling using 5-axis model
Drilling of all diameters
Countersinking of all diameters
Edge handling e.g. groove, chamfers and tongue finalizing, dry lining sides
for Fermacell and wallboard individual panels and so forth.
Ink jet lettering for numberings, club rule labelling, customer trademarks and so forth.…
Chip removal is obviously conducted straight with the digesting location. On this page, the extraction sytem is immediately sealed at all products that happen to be not being utilised. Panel give can be achieved personally or together with the pre-existing vacuum lifter. Our fully intelligent packing system permits processing from the bunch with out further handling costs “unmanned manufacturing”. Cuts and processings may be entered specifically with the operator about the machine laptop or computer or maybe the complete data could be transferred coming from all commercial readily available CAD plans. The nesting optimisation element included within the machine system optimises all the parts as regards spend optimisation and handling speed and quality within seconds. All software program updates are free of cost as always.